C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 Messages of other data coding schemes result in indication as defined in =1. (num)(&W)(&V) Rules for storing received CBMs depend on the relevant data coding method (refer to GSM 03.38), the setting of Select CBM Types (AT+CSCB) and this value: [0] (&F) No CBM indications are routed to the TE. 2 New CBMs are routed directly to the TE using unsolicited result code: 3 Class 3 CBMs are routed directly to TE using unsolicited result codes defined in =2. (num)(&W)(&V) [0] (&F) No SMS-STATUS-REPORTs are routed to the TE. 1 SMS-STATUS-REPORTs are routed to the TE using unsolicited result code: 2 If SMS-STATUS-REPORT is routed into ME/TA, indication of the memory location is routed to the TE using unsolicited result code: (num)(&W)(&V) [1] (&F) TA buffer of unsolicited result codes defined within this command is cleared when 1...3 is entered. (num) integer type; value in the range of location numbers supported by the associated memory Notes • Each time an SMS or Cell Broadcast Message is received, the Ring Line goes Logic "1" for one second. • Parameters =2,3 and =1 are only available with GSM phase 2+ (see AT+CSMS=1). Incoming SMS or Status Reports have to be acknowledged with AT+CNMA=0 when using these phase 2+ parameters. • Due to GSM 03.38 the ME treats short messages with message class 0 as though there was no message class, i.e. it will ignore bits 0 and 1 in the TP-DCS and normal rules for memory capacity exceeded shall apply. • To allow SMS overflow presentation during data transfers via Break, use AT+CNMI=3,1 (see AT^SMGO). • Handling of Class 0 short messages: If the host application is provided with a display and AT^SSDA=1 has been set Class 0 short messages can be displayed immediately. If the host application does not include a display, ME handles Class 0 short messages as though there was no message class, i.e. it will ignore bits 0 and 1 in the and normal rules for exceeded memory capacity shall apply. This approach is compliant with GSM 03.38. • The parameters and will only be displayed if of the AT^SSCONF command is set to 1. • If either a SM or a Status Report is not acknowledged, all AT+CNMI parameter in all channels will be set to zero. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 226
C55/C55I AT COMMAND SET VERSION 1.00 11.12 AT+CPMS Preferred SMS message storage Syntax Test Command AT+CPMS=? Read Command AT+CPMS? Write Command AT+CPMS=[,[,]] Response(s) +CPMS: (list of supported s), (list of supported s), (list of supported s) OK Response(s) + CPMS: , , , , , , , , OK ERROR ERROR +CMS ERROR Reference(s) PIN ASC0 GSM 07.05 ● ● Response(s) +CPMS: ,>, , , , OK ERROR ERROR +CMS ERROR Command Description The write command selects memory storages ,, to be used for reading, writing, etc. Parameter Description (num) Number of messages currently in (num) Number of messages currently in (num) Number of messages currently in (num) Number of messages storable in (num) Number of messages storable in (num) Number of messages storable in Notes • The Mobile Equipment storage "ME" offers space for 25 short messages, see . • "MT" is the sum of "ME" (= 25 locations) and "SM" (capacity varies with SIM card). The indices of the "MT" storage are dependent on the order selected with AT^SSMSS. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 227
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176: C55/C55I AT COMMAND SET VERSION 1.0
Page 225: C55/C55I AT COMMAND SET VERSION 1.0
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?