C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
Unsolicited Result Code
If switched on with =1:
Indicates the line used by an incoming call.
Command Description
The read command returns the presentation mode of and the
currently selected . The write command enables or disables the
presentation mode of and selects the preferred .
Parameter Description
(num)
view
Controls the presentation mode of the URC " ^ SALS" which indicates
the line number used by an incoming call:
0 (&F) Disables indication of the called line
1 Enables indication of the called line
(num)
Selects the line to be used for outgoing calls.
[1] ALSLinei
2 ALS Line 2
Notes
• The selected will be saved at non-volatile Flash memory and
thus retained after Power Down.
• The will be reset by AT&F and ATZ and afterwards saved at
non-volatile memory too.
• The will be reset after Power Down as well as by ATZ or
AT&F.
• If a non ALS SIM is inserted, the will be reset to line 1 as
well.
Example
at^sals=1, 1 Line 1 has been selected for outgoing calls. "^SALS" URC
is enabled.
ring You receive a notification that you have an incoming call
on line 2.
^SALS: 2
7.10 AT ^ SHOM Display Homezone
Syntax
Test Command
AT^SHOM=?
Exec Command
AT^SHOM
Response(s)
OK
Response(s)
^SHOM:
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0
SIEMENS ○ ●
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 143