C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 ^ 6.28 AT SLCD Display Last Call Duration Syntax Test Command AT^SLCD=? Exec Command AT^SLCD Response(s) OK ERROR +CME ERROR Response(s) ^SLCD: OK ERROR +CME ERROR Reference(s) PIN ASC0 SIEMENS ● ● Command Description TA returns last call duration or current call duration. Parameter Description (str) Format is "hh:mm:ss", where characters indicate hours, minutes, seconds; E.g. 22:10:00 "22:10:00" Max value is 9999:59:59 ^ 6.29 AT STCD Display Total Call Duration Syntax Test Command Response(s) AT^STCD=? OK +CME ERROR Exec Command Response(s) AT^STCD ^STCD: OK +CME ERROR Reference(s) PIN ASC0 SIEMENS ● ● Command Description TA returns total call duration (accumulated duration of all calls). Parameter Description (str) Format is "hh:mm:ss", where characters indicate hours, minutes, seconds; E.g. 22:10:00 "22:10:00" Max value is 9999:59:59 Note • The Total Call Duration will not be reset by power off or other means. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 128
C55/C55I AT COMMAND SET VERSION 1.00 7 Network Service Commands The AT commands described in this chapter are related to various network services. More commands related to this area can be found in chapter Supplementary Service Commands. 7.1 AT+COPN Read operator names Syntax Test Command AT+COPN=? Exec Command AT+COPN Reference(s) PIN ASC0 GSM 07.07 ● ● Response(s) OK Response(s) + COPN: , + COPN: ... OK Command Description TA returns the list of operator names from the ME. Each operator code that has an alphanumeric equivalent in the ME memory is returned. See also: AT^SPLM. Parameter Description (str) Operator in numeric form; GSM location area identification number. (str) Operator in long alphanumeric format; can contain up to 16 characters. 7.2 AT+COPS Operator selection This command can be used to query the present status of the ME's network registration and to determine whether automatic or manual network selection shall be used. Automatic mode: Lets the ME automatically search for the home operator. If successful the ME registers to the home network and enters the IDLE mode. If the home network is not found, ME goes on searching. If then a permitted operator is found, ME registers to this operator. If no operator is found the ME remains unregistered. Manual mode: Desired operator can be manually entered, using the AT+COPS write command syntax. If operator is found, ME registers to this operator immediately. If the selected operator is forbidden, the ME remains unregistered. Manual/automatic: In this mode, the ME first tries to find the operator that was manually entered. If the ME fails to register to this operator, then it starts to select automatically another network. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 129
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78: C55/C55I AT COMMAND SET VERSION 1.0
Page 89 and 90: XF55 AT COMMAND SET VERSION 1.00 4.
Page 127: C55/C55I AT COMMAND SET VERSION 1.0
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?