C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
Parameter Description
(num)
a numeric parameter which specifies a particular PDP context
definition (see AT+CGDCONT command).
(str)
a string that identifies the MT in the address space applicable to the
PDP. The address may be static or dynamic.
Note
• If no is specified, the write command will return a list of all
defined contexts.
9.8 AT+CGQMIN Quality of Service Profile (Minimum
acceptable)
Syntax
Test Command
AT+CGQMIN=?
Read Command
AT+CGQMIN?
Write Command
AT+CGQMIN=[[,
[, [,
[, [, ]]]]]]
Response(s)
+CGQMIN: , (list of supported
s), (list of supported s),
(list of supported s), (list of
supported s), (list of supported s)
OK
ERROR
+CME ERROR
Response(s)
+ CGQMIN: , , ,
, ,
OK
ERROR
+CME ERROR
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0
GSM 07.07 ● ●
Command Description
The test command returns values supported as a compound value. If
the MT supports several PDP types, the parameter value ranges for
each PDP type are returned on a separate line.
The read command returns the current settings for each defined
context. If no minimum profile was explicitly specified for a context,
simply OK will be returned, but default values will be used for that
context.
This command allows the TE to specify a minimum acceptable
profile which is checked by the MT against the negotiated profile
returned in the Activate PDP Context Accept message.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 177