C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 8.7 AT+CCWA Call Waiting This command controls the "Call Waiting" supplementary service according to GSM 02.83. Activation, deactiva-tion and status query are supported. Syntax Test Command AT+CCWA=? Read Command AT+CCWA? Write Command AT+CCWA=[[][, ][, ]] Response(s) +ccwA:(list of supported s) OK Response(s) +CCWA: OK Reference(s) PIN ASC0 GSM 07.07, GSM 02.04, GSM 02.83, GSM 03.83, GSM 04.83 Response(s) if is not equal 2 and command successful: OK if = 2 and command successful: +CCWA: , [+CCWA: , ] [+CCWA: ...] OK If error is related to ME functionality +CME ERROR ● ● Unsolicited Result Codes URC1 Indication of a call that is currently waiting and can be accepted. +CCWA: , , , If =1 and the call waiting supplementary service is enabled in the network, URC "+CCWA" indicates a waiting call to the TE. It appears while the waiting call is still ringing. URC 2 Indication of a call that has been waiting. If =1 and the call waiting supplementary service is enabled in the network, this URC indicates that a waiting call rang when the ME was in online mode during a CSD call, but the calling party hung up before the ME went back to command mode. Command Description The test command returns the list of supported ""s. The read command returns the current value of parameter . The write command controls the call waiting supplementary service. Activation, deactivation and status query are supported. Parameter Description (num) Switch URCs "+CCWA" and "^SCWA" for call waiting on/off 0 Disable display of URCs "+CCWA" and 1 Enable display of URCs "+CCWA" and " (num) This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 156
C55/C55I AT COMMAND SET VERSION 1.00 Network operation to be performed for Supplementary service call waiting 0 Disable call waiting (disable service) 1 Enable call waiting (enable service) 2 Query status of call waiting (query service status) (num) Integer or sum of integers each representing a class of information, i.e. a bearer service, telecommunication service or bearer service group as defined in "GSM 02.04". In the write command, parameter specifies the class of the active call during which an incoming call of any class is to be regarded as a waiting call. In URC "+CCWA: , , , ", parameter specifies the class of the waiting call. 1 voice 2 data 2 (data) comprises all those values between 16 and 128, that are supported both by the network and the MS. This means, a setting made for 2 applies to all remaining data classes (if supported). In addition, you can assign a different setting to a specific class. For example, you can activate call waiting for all data classes, but deactivate it for a specific data class. 4 fax 8 SMS 16 data circuit sync 32 data circuit async 64 dedicated packet access 128 dedicated PAD access 1...[7]...255 Combination of some of the above classes. For example, the default setting 7 represents the sum of the integers 1, 2 and 4 (CF for voice, data and fax). The value 255 covers all classes. If parameter "class" is omitted, the default value 7 is used. (num) 0 Call waiting service is not active 1 Call waiting service is active (str) Phone number of waiting caller in the format specified by parameter . (num) Type of address octet in integer format (refer to GSM 04.08, subclause 10.5.4.7) 145 includes international access code character'+' 129 Otherwise (num) 0 CLI valid 1 CLI has been withheld This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 157
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106: C55/C55I AT COMMAND SET VERSION 1.0
Page 155: C55/C55I AT COMMAND SET VERSION 1.0
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?