C55/C55i AT COMMAND SET Description Preliminary - Falcom
C55/C55i AT COMMAND SET Description Preliminary - Falcom
C55/C55i AT COMMAND SET Description Preliminary - Falcom
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>C55</strong>/<strong>C55</strong>I <strong>AT</strong> <strong>COMMAND</strong> <strong>SET</strong> VERSION 1.00<br />
digits and dial string modifiers. Extended locations may be<br />
used as stated below for .<br />
(num)<br />
<br />
Type of address octet<br />
If is specified as 129 or 145, any non-digit characters<br />
otherthan "*", "#", or"+" will be removed from the number string. If<br />
the number string contains such characters, they can be saved with<br />
the number string by using 209, see below.<br />
145 dialling string includes international access<br />
code character'+'<br />
209 dialling string contains printable nonalphabetic<br />
non-digit characters that should be saved with<br />
the number string. Remarks as under parameter<br />
apply. For phone book entries with this type,<br />
dialling from phone book with <strong>AT</strong>D> is not<br />
possible.<br />
129 otherwise<br />
(str)(+cscs)<br />
<br />
Text assigned to the phone number. The maximum length for this<br />
parameter is given in test command response . When using<br />
an ASCII terminal, characters which are coded differently in ASCII<br />
and GSM have to be entered via escape sequences as described in<br />
chapter Supported character sets.<br />
(num)<br />
<br />
Max. location for the currently selected storage. For phone books<br />
located on SIM, this value may vary between SIM cards. See<br />
<strong>AT</strong>+CPBS for typical values.<br />
(num)<br />
<br />
Max. length of phone number for "normal" locations. - Depending<br />
on the storage, a limited number of locations with extended memory<br />
is available per phone book. These locations allow storing numbers<br />
with twice the standard length, which is 2* digits for<br />
normal numbers, but only digits for numbers saved with<br />
parameter = 209. If all extended locations of the selected<br />
phone book are used up, then any attempt to write a number which<br />
requires extended memory will be denied with CME ERROR 260:<br />
INVALID DIAL STRING.<br />
(num)<br />
<br />
Maximum length of assigned to the telephone number. The<br />
value indicated by the test command is given in octets. If the <br />
string is given in GSM characters, each character corresponds to one<br />
octet. If the string is given in UCS2, the maximum number of<br />
characters depends on the coding scheme used for the alpha field of<br />
the SIM according to GSM 11.11, Annex B [7]. As a worst case the<br />
number of UCS2 characters is less than half the number of GSM<br />
characters. For a detailed description please refer to GSM 11.11,<br />
Annex B [7].<br />
Examples:<br />
EXAMPLE 1<br />
Make a new phone book entry at the first free location.<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 249