C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
the connection is released. In this case "-" is presented for C1
and C2.
- To some extent, the cell monitoring command AT^SMONC covers
the same parameters. The receiving level, for example, can be
queried with both commands. Yet the resulting values may be
slightly different, even though obtained over a time period of a
few seconds. This is quite normal and nothing to worry about, as
the cell information is permanently updated.
- For compatibility with earlier products and to support legacy
applications, any input character may be used to stop the output
in certain cases (depending on the settings of chapter 3.7 and
0.1).
7.7.1 AT ^ MONP responses
Response of AT^MONP (Example):
Chann rs dBm MCC MNC BCC C1 C2
653 26 -84 262 07 0 22 22
660 20 -90 262 07 3 16 16
687 19 -91 262 07 1 15 15
678 14 -96 262 07 3 10 10
671 14 -96 262 07 1 10 10
643 10 -100 262 07 7 6 6
Column Description
chann ARFCN (Absolute Radio Frequency Channel Number) of the
BCCH carrier RSSI value 0 - 63
rs RSSI value 0 - 63 (RSSI = Received signal strength
indication)
dBm receiving level in dBm
MCC Mobile Country Code (first part of the PLMN code)
MCC Mobile Network Code (second part of the PLMN code)
BCC Base Station colour code
C1 cell selection criterion
C2 cell reselection criterion
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 140