C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
17 Appendix
17.1 Restricted access to SIM data after SIM PIN authentication
The following commands can be used only after data from the SIM have
been read successfully for the first time. Reading starts after successful
SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an
attempt to use any of the following commands will result in "+CME Error:
14" (SIM busy).
Ø AT command not available.
○ AT command accessible immediately after PIN entry has
returned OK.
● AT command fully accessible after SIM PIN authentication has
been completed.
AT Command Exec Test Read Write
AT+CMGL ● ○ Ø ●
AT^SMGL ● ○ Ø ●
AT+CMGR Ø ○ Ø ●
AT^SMGR Ø ○ Ø ●
AT+CSCA Ø ○ ● ○
AT+CPBR Ø ● Ø ●
AT+CPBW Ø ● Ø ●
AT+CPBS Ø ● ● ●
AT^SDLD ● ● Ø Ø
AT^SPBC Ø ● Ø ●
AT^SPBD Ø ● Ø ●
AT^SPBG Ø ● Ø
●
AT^SPBS Ø ● Ø ●
ATD> ● Ø Ø
Ø
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 282