C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
1.9 AT ^ SMSO Switch off mobile station
Syntax
Test Command
AT^SMSO=?
Exec Command
AT^SMSO
Response(s)
OK
Response(s)
^SMSO: MS OFF
OK
Reference(s) PIN ASC0
SIEMENS ○ ●
Unsolicited Result Code
^SHUTDOWN
Indicates that the power-off procedure is finished and the module will
be switched off within 1 second.
Command Description
The exec command initiates the power-off procedure. Display of URC
"^SHUTDOWN" verifies that the procedure has completed and the
module has entered the POWER DOWN mode. Therefore, be sure not
to disconnect the operating voltage until VDD is low or until URC
"^SHUTDOWN" is displayed. Otherwise, you run the risk of losing data.
For further details on how to turn off the module see the [2].
Notes
• Do not send any command after this command.
1.10 AT+GCAP Request complete TA capabilities list
Syntax
Test Command
AT+GCAP=?
Exec Command
AT+GCAP
Response(s)
OK
Response(s)
+GCAP:
OK
Reference(s) PIN ASC0
V.25ter ○ ●
Command Description
TA reports a list of additional capabilities.
Parameter Description
(str)
e.g.: +CGSM,+FCLASS
Note
• +CGSM: The response text shows which GSM commands of the
ETSI standard are supported.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 31