C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 8.11 AT+CPUC Price per unit and currency table Syntax Test Command AT+CPUC=? Read Command AT+CPUC? Write Command Response(s) OK Response(s) + CPUC: , OK ERROR +CME ERROR: Response(s) AT+CPUC=, [, ] OK ERROR +CME ERROR: Reference(s) PIN ASC0 GSM 07.07 ● ● Command Description Read command returns the current parameters of PUC. Write command sets the parameters of Advice of Charge related price per unit and currency table. SIM PIN2 is usually required to set the parameters. Parameter Description (str)(+CSCS) Three-character currency code (e.g. "GBP", "EUR"). If the currency name is longer than three characters, all characters will be cut off after the third position. Before they are written to the SIM card, these characters are converted to the standard GSM alphabet. (str) Price per unit; dot is used as a decimal separator (e.g. "2.66"). The length is limited to 20 characters. If the string length is exceeded, the command is terminated with an error. This string may only contain digits and a dot. Leading zeros are removed from the string. The minimum and maximum value are determined by the structure of the SIM-PUCT file. The maximum price per unit value is 999 999 999.00. When successfully entered, this value is rounded to maximum accuracy. Note: Due to storage in mantisse (range 0-4095) and exponent (-7 to 7) it is possible that rounding errors occur. (str) SIM PIN2. String parameter which can contain any combination of characters. The maximum string length is limited to 8 characters. If this value is exceeded, the command terminates with an error message. If the PIN2 is incorrect, a CME error (+CME ERROR: incorrect password) is output. Example To change currency and/or price per unit you have two ways: This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 164
C55/C55I AT COMMAND SET VERSION 1.00 You can enter PIN2 along with the AT+CPUC command: AT+CPUC="EUR","0.10","8888" (where "8888" = PIN2) OK Alternatively, you can first use the AT+CPIN2 command to enter PIN2. When you execute the AT+CPUC command, subsequently, take into account that PIN2 authentication expires after 300 ms (see notes in AT+CPIN2). AT+CPUC="EUR","0.10" OK successful AT+CPUC="EUR","0.10" +CME ERROR: SIM PIN2 required Attempt not successful. PIN2 authentication has expired. 8.12 AT+CSSN Supplementary service notifications Syntax Test Command AT+CSSN=? Read Command Response(s) AT+CSSN? + CSSN: , OK Write Command Response(s) AT+CSSN=[,] OK ERROR +CME ERROR Reference(s) PIN ASC0 GSM 07.07 ● ● Response(s) +CSSN: (list of supported s), (list of supported s) OK Unsolicited Result Codes URC 1 +CSSI: When =1 and a supplementary service notification is received after a mobile originated call setup, intermediate result code "+cssi": is sent to TE before any other MO call setup result codes URC 2 +CSSU: When =1 and a supplementary service notification is received during a mobile terminated call setup or during a call, unsolicited result code "+cssu": is sent to TE. Command Description The write command enables or disables the presentation of URCs for supplementary services. Parameter Description (num) 0 (&F) Suppress "+CSSI" URCs 1 Activate "+CSSI" URCs This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 165
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114: C55/C55I AT COMMAND SET VERSION 1.0
Page 163: C55/C55I AT COMMAND SET VERSION 1.0
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?