C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
SMS-COMMANDs in +CMGR result code, do not
show ,,, , or .
1 Show the values in result codes.
11.16 AT+CSMP Set SMS text mode parameters
Syntax
Test Command
AT+CSMP=?
Read Command
AT+CSMP?
Response(s)
OK
Write Command Response(s)
AT+CSMP=[, /[,
[, ]]]
Response(s)
+ CSMP:, /, ,
OK
+CSMP:
OK
If sending fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0
GSM 07.05 ● ●
Command Description
The write command selects values for additional parameters needed
when SM is sent to the network or placed in a storage when text
format message mode is selected.
It is possible to set the validity period starting from when the SM is
received by the SMSC ( is in range 0... 255) or define the
absolute time of the validity period termination ( is a string).
The format of is given by . If TA supports the enhanced
validity period format, see GSM 03.40), it shall be given as a
hexadecimal coded string (e.g. ) with quotes.
Parameter Description
(num)
First Octet
depending on the command or result code: first octet of GSM
03.40 SMS-DELIVER, SMS-SUBMIT (default 17), SMS-
STATUS-REPORT, or SMS-COMMAND (default 2) in integer
format
(&F)
0...17 ...255
(num)
Depending on SMS-SUBMIT setting: GSM 03.40 TP-Validity-
Period either in integer format or in time-string format (refer )
(&F)
0...167 ...255
(num)
Data Coding Scheme
GSM 03.38 SMS Data Coding Scheme, or Cell Broadcast Data
Coding Scheme in integer format
(&F)
0 ...247
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 231