C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 Command Description The test command returns the index range for this command, the maximum length of field, and the maximum length of field. Note: The length may not be available while SIM storage is selected. If storage does not offer format information, the format list should be empty parenthesises. The write command selects the index of the phone book entry, that is to be displayed, in the sorted list of phone book, or the range of indices to display. If no is given, only the entry at will be displayed. If parameter =1, the actual location of the entry displayed will be indicated in parameter . If is omitted or =0, parameter will not be displayed. The indices displayed in the first parameter of the write command response are indices in the sorted list of entries, and not related to the entries' location in the phone book. They may not be used for other phone book commands or ATD>. Instead, parameter must be used for these purposes. Parameter Description (num) The first index number within the sorted list of phone book for which the corresponding entry is to be displayed. The supported range is given in the test command response. If exceeds the upper bound , the AT command will return a CME ERROR 21. (num) The last index number within the sorted list of phone book for which the corresponding entry is to be displayed. The supported range is given in the test command response. If both and are in the range indicated by the test command in parameter , the list of entries will be output and terminated with OK. If exceeds the range indicated by the test command in parameter , the list of entries will be output but terminated with a +CME ERROR 21 "INVALID INDEX". (num) Is a display of the "real" of the entry required? [0] Do not display an entries "real" location number. Parameter will not be displayed. 1 Display the "real" location number as parameter at the end of the entry. (str) String type phone number in format specified by . The number parameter may be an empty string. (num) type of address octet 145 dialling string includes international access code character'+' This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 254
C55/C55I AT COMMAND SET VERSION 1.00 209 dialling string contains printable nonalphabetic non-digit characters saved with the number string. For further detail, check the parameter descriptions for at command at+cpbw. 129 otherwise (str)(+cscs) Text assigned to the phone number. The maximum length for this parameter is given in test command response . (num) Value indicating the number of used locations in selected memory storage. (num) The location within phone book memory at which the corresponding entry is located. This location may be used for other commands, (e.g. at+cpbr or ATD>) (num) Max. length of phone number for "normal" locations. - Depending on the storage, a limited number of locations with extended memory is available per phone book. Please refer to AT command at+cpbw for detail. (num) Max. length of assigned to the telephone number. The value indicated by the test command is given in octets. If the string is given in GSM characters, each character corresponds to one octet. If the string is given in UCS2, the maximum number of characters depends on the coding scheme used for the alpha field of the SIM according to GSM 11.11, Annex B. In the worst case, the number of UCS2 characters is less than half the number of GSM characters. For a detailed description see GSM 11.11, Annex B. Notes • The AT^SPBG feature is able to sort by the first 6 matching characters only. All following characters will be ignored. • The command can be used for the phone books "SM", "FD", "ME" (cf. at+cpbs). Examples EXAMPLE 1: Using APSPBG without . a) First, run the test command to find out the range of phone book entries stored in the active phone book by using: AT^SPBG=? TA returns the number of entries in the format: ^SPBG: (1-33),20,17 where 33 is the number of used entries in the active phone book storage. b) Now, run the write command to display the phone book entries by alphabetical order. It is recommended to enter the full range to obtain best results. AT^SPBG=1,33 TA returns phone book entries by alphabetical order: ^SPBG:1,"+999999",145,"Arthur" This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 255
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204: C55/C55I AT COMMAND SET VERSION 1.0
Page 253: C55/C55I AT COMMAND SET VERSION 1.0
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?