C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 (num) Error Correction Mode Note: Only the default value needs to be implemented. Use test command to check which parameter values are really possible! [0] disable ECM 1 enable ECM, 64 bytes/frame 2 enable ECM, 256 bytes/frame (num) Page Length 0 A4, 297 mm 1 B4, 364 mm [2] unlimited length (num) modulation mode 3 V21 Ch2 - 300 bps 24 V.27ter - 2400 bps 27 V.27ter-4800 bps 48 V.27ter - 7200 bps 72 V.29 - 7200 bps 96 V.29 - 9600 bps (num) Scan Time/Line Note: Only the default value needs to be implemented. Use test command to check which parameter values are really possible![0] 0 ms (at VR= normal) 1 5 ms 2 10 ms 3 10 ms 4 20 ms 5 20 ms 6 40 ms 7 40 ms (num) Vertical Resolution 0 normal, 98 lpi [1] fine, 196 lpi (num) Page Width [0] 1728 pixels in 215mm 1 2048 pixels in 255 mm 2 2432 pixels in 303 mm 3 1216 pixels in 151 mm 4 864 pixels in 107 mm Note • Only the default value needs to be implemented. Use test command to check which parameter values are really possible. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 196
C55/C55I AT COMMAND SET VERSION 1.00 10.2 AT+FBADLIN Bad Line Threshold Syntax Read Command AT+FBADLIN? Write Command AT+FBADLIN= Response(s) OK OK Reference(s) PIN ASC0 EIA PN-2388 ○ ● Response(s) OK If error is related to ME functionality ERROR Command Description This command defines the Copy-Quality-OK-threshold. If consecutive lines have pixel count errors in normal resolution (98 dpi) mode, then the copy quality is unacceptable. If * 2 consecutive lines have pixel count errors in fine resolution (196 dpi) mode, then the copy quality is unacceptable. "Copy Quality Not OK" occurs if either the error percentage is too high or too many consecutive lines contain errors. A value of 0 implies that error checking is not present or disabled. Parameter Description (num) bad lines (P) 0...10 ...255 Note • Used for Fax Class 2 only 10.3 AT+FBADMUL Error Threshold Multiplier Syntax Read Command AT+FBADMUL? Write Command AT+FBADMUL= Response(s) OK Reference(s) PIN ASC0 EIA PN-2388 ○ ● Response(s) OK If error is related to ME functionality: ERROR This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 197
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146: C55/C55I AT COMMAND SET VERSION 1.0
Page 195: C55/C55I AT COMMAND SET VERSION 1.0
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?