C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
Parameter Description
(str)
String of ASCII characters in the set 0-9,#,*,A, B, C, D. Maximal
length of the string is 29. The string must be enclosed in quotation
marks ("...").
(str)
ASCII character in the set 0...9,#,*, A, B, C, D.
(num)
Tone duration in 1/10 second. If not specified current setting of
at+vtd is used.
1...255
14.7 AT ^ SNFD Set audio parameters to manufacturer default
values
Syntax
Read Command
AT^SNFD?
Exec Command
AT^SNFD
Response(s)
^SNFD: (list of supported s)
OK
Response(s)
OK
Reference(s) PIN ASC0
SIEMENS ○ ●
Command Description
TA sets the active audio parameters to manufacturer defined default
values.
Notes
• The restored values are:
AT^SNFI: ,
AT^SNFO: , [0 to 4],
• Remember that the factory set audio mode 1 is fixed to
=4. Consequently, AT^SNFD restores
together with =4, but does not affect the values of
currently selected in audio modes 2 - 6. This means, if
=1, the read commands AT^SNFO, AT^SNFV and
AT+CLVL will always deliver =4. In all other modes the
value is retained until explicitly changed.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 265