C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
1.5 ATV Set result code format mode
This command determines the contents of header and trailer transmitted
with AT command result codes and information responses. Possible
responses are described at 1.5.1.
Syntax
Exec Command
ATV[]
Response(s) If =0 0
If =1
OK
Reference(s) PIN ASC0
V.25ter ○ ●
Parameter Description
(num)(&W)(&V)
[0] Information response:
Short result code format:
1 Information response:
Long result code format:
1.5.1 Verbose and numeric result codes
Verbose format Numeric format Meaning
OK 0 Command executed, no errors
CONNECT 1 Link established
RING 2 Ring detected
NO CARRIER 3 Link not established or disconnected
ERROR 4 Invalid command or command line too
long
NO DIALTONE 6 No dial tone , dialling impossible, wrong
mode
BUSY 7 Remote station busy
CONNECT 2004/RLP 47 Link with 2400 bps and Radio Link
Protocol
CONNECT 4800/RLP 48 Link with 4800 bps and Radio Link
Protocol
CONNECT 9600/RLP 49 Link with 9600 bps and Radio Link
Protocol
CONNECT 14400/RLP 50 Link with 14400 bps and Radio Link
Protocol
ALERTING Alerting at called phone
DIALING Mobile phone is dialing
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 24