C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
9.13 AT ^ SGCONF Configuration of GPRS related Parameters
Syntax
Test Command
AT^SGCONF=?
Read Command
AT^SGCONF?
Write Command
AT^SGCONF=[][,
]
Response(s)
^SGCONF: (list of supported
s), (list of supported
es)
OK
Reference(s) PIN
SIEMENS ○ ●
Response(s)
^SGCONF: ,
OK
Response(s)
OK
ERROR
+CME ERROR
ASC0
Parameter Description
(num)
LLC-PDU-length
0 no negotiation with network (500 will be used)
14O...152O (P) lower values diminish performance
(num)
GPRS Multislot Class. The parameter can be changed only when the
MT is detached, otherwise "CME ERROR: operation temporary not
allowed" will be returned. The value can be one of the classes
indicated with the test command.
Notes
• +CME ERROR: invalid index: Parameter is out of range.
• +CME ERROR: operation temporary not allowed: The command
is blocked as long as GPRS is already in use (as long as mobile is
GPRS attached).
• Writing to user profile with AT&W and restoring with AT&F are not
supported.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 187