C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 • For more information regarding SIM and ME specific message classes refer to and the following specifications: GSM 03.38 and 3GPP TS 23.038 . ^ 11.21 AT SMGR Read SMS message without setting status to REC READ Syntax Test Command AT^SMGR=? Write Command AT^SMGR= Response(s) ^SMGR: OK Response(s) see AT+CMGR Reference(s) PIN ASC0 SIEMENS ● ● Notes • The AT^SMGR command is a specific Siemens command with the same syntax as AT+CMGR Read SMS message. The only difference is that the status "REC UNREAD" of a short message is not overwritten to "REC READ". • This command can be used only after the SMS data from the SIM have been read successfully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the SMS read commands will result in "+CME Error: 14" (SIM busy). ^ 11.22 AT SSCONF SMS Command Configuration Syntax Test Command AT^SSCONF=? Read Command AT^SSCONF? AT^SSCONF controls details of some SMS releated commands. Please note that AT^SSCONF settings are stored volatile, i.e. after restart or reset the default values will be restored. Write Command AT^SSCONF= PIN ASC0 ○ ● Response(s) ^SSCONF: list of supported s OK Response(s) ^SSCONF: OK Response(s) OK This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 236
C55/C55I AT COMMAND SET VERSION 1.00 Parameter Description (num) Display recipient address (&F) [0] C55 does not display and . These parameters are used with the result codes of AT+CMGL, AT^SMGL, AT+CMGR, AT^SMGR and the URC "+CDS". 1 C55 displays and . ^ 11.23 AT SSDA Set SMS Display Availability Syntax Test Command AT^SSDA=? Read Command AT^SSDA? Write Command AT^SSDA= This command allows to notify the C55 of its controlling application's capability to immediately display incoming SMS on a display. If the application is able to display incoming SMS, class 0 SMS shall be displayed immediately. However, if it does not, class 0 SMS shall be treated as if no message class is determined (GSM 03.38[14]). The effect of this command if =1 is to determine the behavior of parameter of AT+CNMI: If =1 and =1 incoming class 0 SMS need to be acknowledged with AT+CNMA (see also AT+CNMI and AT+CSMS). Response(s) ^SSDA:list of supported s OK Response(s) ^SSDA: OK Response(s) OK Reference(s) PIN ASC0 SIEMENS ○ ● Command Description The read command returns ME's current capability setting. Parameter Description (num) Display Availability (&F) 0 Application is not able to display incoming SMS 1 Application is able to display incoming SMS This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 237
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186: C55/C55I AT COMMAND SET VERSION 1.0
Page 235: C55/C55I AT COMMAND SET VERSION 1.0
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?