C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 0...255 (str) Information which shall be written to the SIM (hexadecimal character format) (num) Status information from the SIM about the execution of the actual command. These parameters are delivered to the TE in both cases, on successful or failed execution of the command; refer GSM 11.11. 0...255 (num) Status information from the SIM about the execution of the actual command. These parameters are delivered to the TE in both cases, on successful or failed execution of the command; refer GSM 11.11. 0...255 (str) Response of a successful completion of the previously issued command. STATUS and GET RESPONSE commands return data, which gives information about the current elementary data field. This information includes the type of file and its size (refer GSM 51.011). After READ BINARY or READ RECORD command the requested data will be returned. is not returned after a successful UPDATE BINARY or UPDATE RECORD command. ^ 12.2 AT SCKS Query SIM and Chip Card Holder Status This command controls the SIM connection presentation mode and queries the connection status of the SIM and the card holder tray of the C55. Syntax Test Command AT^SCKS=? Read Command AT^SCKS? Write Command AT^SCKS= Response(s) ^SCKS:(list of supported s) OK Response(s) ^SCKS: , OK ERROR +CME ERROR: Response(s) OK ERROR +CME ERROR: Reference(s) PIN ASC0 SIEMENS ○ ● This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 240
C55/C55I AT COMMAND SET VERSION 1.00 Unsolicited Result Code ^SCKS: During startup, and if the C55's SIM connection status has changed an unsolicited result code (URC) is issued. Command Description The read command returns the URC presentation mode and the status of the SIM card connection. The write command enables or disables the presentation of URCs to report whether or not the SIM card is connected. If the ME is powered down or reset (AT+CFUN or AT^SMSO) the current presentation mode setting will not be retained. Therefore the setting =1 needs to be restored after power on the C55 or may be saved in the user profile (AT&W). Parameter Description (num)(&W)(&V) (&F) 0 Suppress unsolicited result codes 1 Output unsolicited result codes (num)(&V) 0 Card holdertray removed or SIM connection error 1 SIM inserted (refer to note) Note • reflects the status of the SIM and the card holdertray. Therefore if an empty SIM card tray is inserted, two URCs will be presented, indicating the status 1 followed by 0, i.e. a SIM is inserted into the card holdertray but no SIM connection could be established. Example: ^ AT SCKS=I Activates the presentation of unsolicited result codes OK Now, after inserting an empty card tray the following URCs appear: ^ SCKS: 1 Tray connected ^ SCKS : 0 No SIM card found ^ 12.3 AT SCID Display SIM card identification number Syntax Test Command AT^SCID=? Exec Command AT^SCID Response(s) OK Response(s) ^SCID: OK ERROR +CME ERROR: Reference(s) PIN ASC0 SIEMENS ○ ● This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 241
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190: C55/C55I AT COMMAND SET VERSION 1.0
Page 239: C55/C55I AT COMMAND SET VERSION 1.0
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?