C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
5 Identification Commands
The AT commands described in this chapter allow the external application
to obtain various identification information related to the C55 and linked
entities.
5.1 ATI Display product identification information
Syntax
Exec Command
ATI
Exec Command
ATI []
Response(s)
SIEMENS C55 REVISION xx.yy
OK
Reference(s) PIN ASC0
V.25ter ● ●
Response(s)
[SIEMENS Gipsy Soft Protocolstack V2.550]
OK
Command Description
ME issues product information text.
Explanation of' Revision' parameter: Version xx and variant yy of
software release.
ME issues additional identification information, after using with
optional parameter. ATI9 delivers the information above. Other values
are not supported and only return OK.
Parameter Description
(num)
SIEMENS Gipsy Soft Protocol stack V2.550
5.2 AT+CGMI Request manufacturer identification
Syntax
Test Command
AT+CGMI=?
Exec Command
AT+CGMI
Response(s)
OK
Response(s)
SIEMENS
OK
Reference(s) PIN ASC0
GSM 07.07 ○ ●
Command Description
TA returns manufacturer identification text.
Note
• See also: AT+GMI.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 94