C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
6.24 AT+CR Service reporting control
Syntax
Test Command
Response(s)
AT+CR=?
+CR: (list of supporteds)
OK
ERROR
+CME ERROR
Read Command Response(s)
AT+CR?
+CR:
OK
ERROR +CME ERROR
Write Command
Response(s)
AT+CR=
OK
ERROR
+CME ERROR
Reference(s) PIN
GSM 07.07 ●
ASC0
Intermediate Result Code
If enabled, an intermediate result code is transmitted at the point
during connect negotiation when the TA has determined the speed and
quality of service to be used, before any error control or data
compression reports are transmitted, and before any final result code
(e.g. CONNECT) appears.
+CR:
Command Description
Configures the TA whether or not to transmit an intermediate result
code+CR: to TE when a call is being set up.
Parameter Description
(num)(&W)(&V)
(&F)
0 disable
1
(str)
enable
"REL ASYNC" "GPRS- asynchronous non-transparent GPRS »
Notes
• The PLMN influences the second air interface (to the terminator),
therefore another mode may be established from the network.
• Setting the value of to 1 may lead to connection failure, if
the application (e.g. WinFax) waits for default result code/URC.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 124
●