C55/C55i AT COMMAND SET Description Preliminary - Falcom
C55/C55i AT COMMAND SET Description Preliminary - Falcom
C55/C55i AT COMMAND SET Description Preliminary - Falcom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>C55</strong>/<strong>C55</strong>I <strong>AT</strong> <strong>COMMAND</strong> <strong>SET</strong> VERSION 1.00<br />
Syntax<br />
Test Command<br />
<strong>AT</strong>+CPBW=?<br />
Write Command<br />
<strong>AT</strong>+CPBW=[][,<br />
[[, ][, ]]]<br />
Response(s)<br />
+ CPBW: (1-), , (list of<br />
supported s), <br />
OK<br />
ERROR<br />
+CME ERROR<br />
Response(s)<br />
OK<br />
ERROR<br />
+CME ERROR<br />
Reference(s) PIN ASC0<br />
GSM 07.07 ●<br />
Command <strong>Description</strong><br />
The test command returns the location range supported by the<br />
current storage, the maximum length of field, the range of<br />
supported values and the maximum length of field.<br />
Note: The length may not be available while SIM storage is selected.<br />
If storage does not offer format information, the format list contains<br />
empty parenthesizes.<br />
The write command fills a phone book entry at memory location<br />
of the active storage selected with <strong>AT</strong>+CPBS.<br />
If ="FD" (SIM fixed dialling numbers) is selected, PIN2<br />
authentication has to be performed prior to any write access.<br />
If no is given, the first free entry will be used.<br />
If is given as the only parameter, the phone book entry<br />
specified by is deleted.<br />
If write attempt fails "+CME ERROR" is indicated.<br />
Parameter <strong>Description</strong><br />
(num)<br />
<br />
Location number within phone book-memory. The-supported-rangeis<br />
given-with-the test-command-response.<br />
(str)<br />
<br />
Phone number with format specified by . Parameter must be<br />
present, although it may be an empty string. However, alphabetic<br />
characters are not permitted.<br />
may contain printable non-alphabetic characters of the<br />
standard GSM alphabet as dialstring modifiers, including "*", "#"<br />
or"+". However, if contains modifiers otherthan "*", "#"<br />
or"+" the following constraints shall be considered:<br />
• If no was specified explicitly, all accepted modifiers<br />
from the GSM alphabet will be saved in the number string.<br />
will be set to 209 (ASCII). However, limitations as<br />
listed below for 209 apply.<br />
• A saved with =209 requires double memory.<br />
In order to fit into a standard location, the number needs to be<br />
reduced to a maximum length of /2, including all<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 248<br />
●