C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
^SPBG:2,"+7777 77",145,"Bill"
^SPBG:3,"+888888",145,"Charlie"
The numbers at the beginning of each line are not the memory
locations in the phone book, but only serial numbers assigned to
the entries' positions in the alphabetical list.
EXAMPLE 2:
Using AT^SPBG with
a) First, run the test command to find out the range of phone book
entries stored in the active phone book:
AT^SPBG=?
TA returns the number of entries in the format:
^SPBG: (1-33),20,17
where 33 is the total number of entries in the active phone book
storage.
b) Now, run the write command to display the phone book entries by
alphabetical order. It is recommended to enter the full range to
obtain best results.
Use parameter =1 in order to obtain the entries'
location numbers.
AT^SPBG=1,33,1
TA returns phone book entries by alphabetical order:
^SPBG:1,"+999999",145,"Arthur",27
^SPBG:2,"+777777",145,"Bill",6
^SPBG:3,"+888888",145,"Charlie",15
c) The numbers at the end of each line are now the memory locations
in the phone book and can be used for dialing or editing phone
book entries:
AT+CPBR=27
Read out phone book location 27.
+CPBR: 2 7," + 999 999",145,"Arthur"
d) This entry can now be edited with
at+cpbw.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 256