C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 Command Description This command causes the TA to terminate a transmission and wait for 10 millisecond intervals before responding with the OK result code to the DTE. Parameter Description (num) no. of 10 millisecond intervals 0...85 Note • Used for Fax Class 1 only 10.28 AT+FVRFC Vertical resolution format conversion Syntax Test Command AT+FVRFC=? Read Command AT+FVRFC? Write Command AT+FVRFC= Response(s) (list of supported s) OK Response(s) OK Response(s) OK Reference(s) PIN ASC0 EIA PN-2388 ○ ● Command Description This command determines the DCE response to a mismatch between the vertical resolution negotiated for the facsimile session and the Phase C data desired by the DTE. Parameter Description (num) 0 Disable mismatch checking. [2] Enable mismatch checking, with resolution conversion of 1-D data in the DCE, and an implied AT+FK command executed on 2-D mismatch detection. Note • Used for Fax Class 2 only This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 210
C55/C55I AT COMMAND SET VERSION 1.00 11 Short Message Service (SMS) Commands The AT commands described in this chapter allows an external application to use the Short Message Service with the C55. 11.1 SMS parameters Parameter Description (num) Format is same for in case of SMS, but without GSM 24.11 SC address field and parameter shall be bounded by double quote characters like a normal string type parameter (str)(+CSCS) String type alphanumeric representation of or corresponding to the entry found in phone book; implementation of this feature is manufacturer specific (num) Command Data GSM 03.40 TP-Command-Data in text mode responses; ME/TA converts each 8-bit octet into two IRA character long hexadecimal numbers (e.g. octet with integer value 42 is presented to TE as two characters 2A (IRA 50 and 65)) (num) Command Type GSM 03.40 TP-Command-Type in integer format [0]...255 (num)(+CSCS) Destination Address GSM 03.40 TP - Destination-Address Address-Value field in string format; BCD numbers (or GSM default alphabet characters) are converted into characters; type of address given by (num)(+CSCS) User Data In case of SMS: GSM 03.40 TP-User-Data in text mode responses; format: • If indicates that GSM 03.38 default alphabet is used and indicates that GSM 03.40 TP-User-Data-Header-Indication is not set: ME/TA converts GSM alphabet into current TE character set according to rules covered in Annex A. • If indicates that 8-bit or UCS2 data coding scheme is used, or indicates that GSM 03.40 TP-User-Data-Header- Indication is set: ME/TA converts each 8-bit octet into hexadecimal numbers con-taining two IRA characters (e.g. octet with integer value 42 is presented to TE as two characters 2A (IRA 50 and 65). • In case of CBS: GSM 03.41 CBM Content of Message in text mode responses; format: • If indicates that GSM 03.38 default alphabet is used: ME/TA converts GSM alphabet into current TE character set according to rules covered in Annex A. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 211
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160: C55/C55I AT COMMAND SET VERSION 1.0
Page 209: C55/C55I AT COMMAND SET VERSION 1.0
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?