C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 11.6 AT+CMGR Read SMS messages Syntax Test Command AT+CMGR=? Write Command AT+CMGR= Response(s) OK Response(s) Output if text mode (AT+CMGF=1) and command successful: For SMS-DELIVER + CMGR: ,,[],[,,,,,, ,] […] OK For SMS-SUBMIT + CMGR: ,,[][,,,,,[],, ,] Reference(s) PIN ASC0 GSM 07.05 ● ● […] OK For SMS-STATUS-REPORT + CMGR: ,,,[],[],,, […] OK For SMS-Commands +CMGR:,,[,,[],[],[],] […] OK Output if PDU mode (AT+CMGF=0) and command successful: For SMS-SUBMITs and/or SMS-DELIVERs + CMGR: ,[], OK ERROR +CMS ERROR Command Description The write command returns SMS message with location value from message storage to the TE. If status of the message is 'received unread', status in the storage changes to 'received read'. Notes • Response if AT+CMGR is used to read an empty record index: +CMGR: 0,,0 This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 218
C55/C55I AT COMMAND SET VERSION 1.00 • Response if AT+CMGR is used to read a non-existent record index: +CMS ERROR: invalid memory index • The parameters and will only be displayed if parameter of the AT^SSCONF command is set to 1. • This command can be used only after the SMS data from the SIM have been read successfully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the SMS read commands will result in "+CME Error: 14" (SIM busy). 11.7 AT+CMGS Send SMS message Syntax Test Command Response(s) AT+CMGS=? OK Write Command If text mode (see AT+CMGF=1) AT+CMGS=[, ] Text can be entered. / Write Command If PDU mode (see AT+CMGF=0) AT+CMGS= PDU can be entered. / Reference(s) PIN ASC0 GSM 07.05 ● ● Response(s) + CMGS: [, ] OK If sending fails see notes below. Response(s) + CMGS: [, ] OK If sending fails see notes below Command Description The write command transmits a short message from TE to network (SMS-SUBMIT). After invoking the write command wait for the prompt ">" and then start to write the message. To send the message simply enter . After the prompt a timer will be started to observe the input. To abort sending use . Abortion is acknowledged with "OK", though the message will not be sent. The message reference is returned to the TE on successful message delivery. The value can be used to identify the message in a delivery status report provided as an unsolicited result code. Notes • If sending fails, for example, if a message is too long, the result code depends on the current setting of the AT^SM2 0 command: If the AT^SM2 0 equals 1 (factory default) any failure to send a message is responded with "OK". Users should be aware, that despite the "OK" response, the message will not be sent to the subscriber. If the AT^SM20 equals 0 any failure to send a message is responded with "ERROR". • If sending fails due to timeout, then This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 219
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168: C55/C55I AT COMMAND SET VERSION 1.0
Page 217: C55/C55I AT COMMAND SET VERSION 1.0
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?