C55/C55i AT COMMAND SET Description Preliminary - Falcom
C55/C55i AT COMMAND SET Description Preliminary - Falcom
C55/C55i AT COMMAND SET Description Preliminary - Falcom
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>C55</strong>/<strong>C55</strong>I <strong>AT</strong> <strong>COMMAND</strong> <strong>SET</strong> VERSION 1.00<br />
If exceeds the range indicated by the test command with<br />
parameter , the list of entries will be output but terminated<br />
with "+CME ERROR: INVALID INDEX".<br />
(str)<br />
<br />
Phone number in format specified by , it may be an empty<br />
string.<br />
(num)<br />
Address type<br />
<br />
145 dialling string includes international access<br />
code character'+'<br />
209 dialling string contains printable nonalphabetic<br />
non-digit characters saved with the number<br />
string.<br />
For phone book entries with this , dialling from<br />
phone book with <strong>AT</strong>D> is not possible. For<br />
further detail, check the parameter descriptions for at<br />
command <strong>AT</strong>+CPBW.<br />
129 otherwise<br />
(str)(+cscs)<br />
Text assigned to a phone number. The maximum length for this<br />
parameter is given with test command response parameter .<br />
If using an ASCII terminal characters which are coded differently in<br />
ASCII and GSM have to be entered via escape sequences as<br />
described in chapter Supported character sets.<br />
<br />
(num)<br />
Maximum location number for the currently selected storage. For<br />
phone books located on the SIM this value depends on the SIM card<br />
type.<br />
<br />
(num)<br />
Maximum length of phone number for "normal" locations.<br />
Depending on the storage a limited number of locations with<br />
extended memory is available per phone book. These locations allow<br />
storing numbers with twice the standard length, which is<br />
2* digits for normal numbers, but only digits<br />
for numbers saved with =209.<br />
<br />
(num)<br />
Maximum length of assigned to the telephone number. The<br />
value indicated by the test command is given in octets. If is<br />
given as GSM characters each character corresponds to one octet. If<br />
the string is given in UCS2, the maximum number of<br />
characters depends on the coding scheme used for the alpha field of<br />
the SIM according to GSM 11.11, Annex B [7]. As a worst case the<br />
number of UCS2 characters is less than half the number of GSM<br />
characters. For a detailed description please refer to GSM 11.11,<br />
Annex B [7].<br />
Examples:<br />
EXAMPLE 1<br />
First run the test command to find out the maximum range of entries<br />
stored in the active phone book<br />
<strong>AT</strong>+CPBR=?<br />
+ CPBR: (1-100) ,20,17<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 245