C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 10.10 AT+FDFFC Data Compression Format Conversion Syntax Test Command AT+FDFFC=? Read Command AT+FDFFC? Write Command AT+FDFFC= Reference(s) PIN ASC0 EIA PN-2388 ○ ● Response(s) (list of s) OK Response(s) OK Response(s) OK Command Description This parameter determines the ME response to a mismatch between the data format negotiated for the fax session, reported by the subparameter, and the Phase C data desired by the controlling application, indicated by the optional AT+FDT subparameter, or the AT+FDIS subparameter for AT+FDR operation. Parameter Description (num) [0] Mismatch checking is always disabled. The controlling application has to check the subparameter and transfer matching data. Notes • For further information see AT+FDIS. • Used for Fax Class 2 only. 10.11 AT+FDIS Query or set session parameters Syntax Test Command AT+FDIS=? Read Command AT+FDIS? Write Command AT+FDIS=, , , , , , , Response(s) (list of s), (list of s), (list of s), (list of s), (list of s), (list of s), (list of s), (list of s) OK Reference(s) PIN ASC0 EIA PN-2388 ○ ● Response(s) ,,,,,,, OK Response(s) OK This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 202
C55/C55I AT COMMAND SET VERSION 1.00 Command Description This command allows the controlling application to sense and constrain the capabilities used for the current session. It uses AT+FDIS to generate DIS or DTC messages directly, and uses AT+FDIS and received DIS messages to generate DCS messages. Note • Used for Fax Class 2 only. 10.12 AT+FDR Begin or continue phase C data reception Syntax Exec Command AT+FDR Reference(s) PIN ASC0 EIA PN-2388 ○ ● Response(s) CONNECT or OK If error related to ME functionality ERROR Command Description The command initiates transition to Phase C data reception. Note • Used for Fax Class 2 only. 10.13 AT+FDT Data Transmission Syntax Exec Command AT+FDT Write Command AT+FDT=, , , Response(s) CONNECT Response(s) CONNECT Reference(s) PIN ASC0 EIA PN-2388 ○ ● Command Description This command requests the ME to transmit a Phase C page. When the ME is ready to accept Phase C data, it issues the negotiation responses and the CONNECT result code to the application. In Phase B, the AT+FDT command releases the ME to proceed with negotiation, and releases the DCS message to the remote station. In Phase C, the AT+FDT command resumes transmission after the end of a data stream transmited before. Note • Used for Fax Class 2 only. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 203
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152: C55/C55I AT COMMAND SET VERSION 1.0
Page 201: C55/C55I AT COMMAND SET VERSION 1.0
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?