C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
13.7 AT ^ SPBG Read current Phone book entries
This command can be used to display the phone book records of the phone
book currently selected with AT+CPBS in sorted order by name. The sort
order is described in chapter 13.1, "Sort order for Phone books". There are
two ways to use command AT^SPBG:
• If the optional parameter is omitted: Please note
that the sorted entries are assigned an index of their own which is
not identical with the location numbers used in the various phone
books.
In this case, command AT^SPBG can be used for reading only. For
example, it helps you find entries starting with matching
characters. Do not use the listed index numbers to dial out or
modify entries.
• To access an entry found with AT^SPBG for editing or dialing, enter
AT^SPBG with the parameter =1.
Then extract the "real" location number of the entry from response
parameter and use this "real" location number with
ATD> or AT+CPBW.
This command can be used only after the phone book data from the SIM
have been read successfully for the first time. Reading starts after
successful SIM authentication has been performed, and may take up to 30
seconds depending on the SIM used. While the read process is in progress,
an attempt to use any of the phone book commands will result in "+CME
Error: 14" (SIM busy).
Syntax
Test Command
AT^SPBG=?
Write Command
AT^SPBG=[,
][,
]
Response(s)
^SPBG: (1-), ,
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0
SIEMENS ● ●
Response(s)
[^SPBG:,, ,
[,]]
[^SPBG: ,, ,
[,]]
OK
ERROR
+CME ERROR
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 253