C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 Command Description Send the manufacturer identification to the TA. Note • Used for Fax Class 2 only. 10.19 AT+FOPT Set bit order independently Syntax Write Command AT+FOPT= Response(s) OK Reference(s) PIN ASC0 SIEMENS ○ ● Command Description Model specific command to set bitorder independently of the understanding which is "mirrored" and which is direct. Parameter Description (num) 0 non-standard 1 standard Note • Used for Fax Class 2 only. 10.20 AT+FPHCTO DTE Phase C Response Timeout Syntax Read Command AT+FPHCTO? Write Command AT+FPHCTO= Response(s) OK Reference(s) PIN ASC0 EIA PN-2388 ○ ● Response(s) OK If error is related to ME functionality ERROR Command Description The time-out value determines how long the DCE will wait for a command after reaching the end of data when transmitting in Phase C. When time-out is reached, the DCE assumes that there are no more pages or documents to send. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 206
C55/C55I AT COMMAND SET VERSION 1.00 Parameter Description (num) Timeout Value in 100ms units 0...30 (P) ...255 Note • Used for Fax Class 2 only. 10.21 AT+FREV Identify Product Revision Syntax Read Command AT+FREV? Response(s) V2.550 OK Reference(s) PIN ASC0 SIEMENS ○ ● Command Description Sends the revision identification to the TA. Note • Used for Fax Class 2 only. 10.22 AT+FRH Receive Data Using HDLC Framing Syntax Write Command AT+FRH= Reference(s) PIN ASC0 TIA/EIA-578 ○ ● Response(s) CONNECT If error related to ME functionality ERROR Command Description This command causes the TA to receive frames using the HDLC protocol and the modulation defined below. An ERROR response code results if this command is issued while the modem is on-hook. Note • Used for Fax Class 1 only This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 207
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156: C55/C55I AT COMMAND SET VERSION 1.0
Page 205: C55/C55I AT COMMAND SET VERSION 1.0
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?