Programming Documents for Pre-K for SA - The City of San Antonio

Technical Requirements
Building Support Functions
CLASSROOM SUPPLY / BULK MATERIALS STORAGE (HIGH DENSITY) (BS-05)
ROOM FUNCTION
This space is intended for storage of surplus materials utilized
for classroom instruction. Items may include construction
paper, paints, glue, etc. A high density storage system shall be
installed in this location to maximize capacity of this room.
ROOM DATA
Net Square Feet (ASF)
Avg. No. of Occupants
No. of Spaces by Type
100 asf
n/a
1 (Eastside); 1 (Westside)
TECHNICAL REQUIREMENTS
ARCHITECTURAL
Floor
Base
Walls
Ceiling
Lighting
MECHANICAL / PLUMBING
Temperature/Humidity
Air Changes/Hour
Hot Water (HW)
Other
Resilient Flooring
Rubber
Painted Gypsum Wallboard
Acoustical Tile System
Fluorescent
Variable 68°f to 75°f @ 50%rh
min. per Code
Cold Water (CW)
SAMPLE ROOM LAYOUT
This diagram is included as a planning tool to ensure that the space
will function as the users require within the assigned square feet. It is
not intended to dictate the final design or configuration of the space.
ELECTRICAL / COMMUNICATIONS
Power 110v/20a/1-phase - See Note 5
Dedicated Circuits
Stand-by Power
Data See Note 4 and 5
Other
FURNISHINGS, FIXTURES & EQUIPMENT
NOTES (CONTINUED)
High Density Storage System cfci 2. Verify that floor structure is adequate to support the high
density storage system. Coordinate with manufacturer’s
specifications.
3. Entry door to space shall be provided with secure (i.e. key
*Note: An outside vendor will be responsible for the
installation of FF&E related to this space. Designer shall
provide adequate space and infrastructure to support
equipment specified for this space. Consult with vendor for
specifications related to this space.
NOTES
1. Reference “Code and Standards” chapter for information
regarding additional design requirements of this space which
may not be listed here.
card) access.
4. Provide (2) 2-port data outlets and (1) telephone outlet
(min.) on two perimeter walls. Building shall be equipped
with wireless technology and infrastructure.
5. Convenience duplex power outlets shall be provided along
the perimeter walls at regular intervals, in accordance with
Code. When locating power and data outlets, special attention
should be paid to the possible location of equipment
and furniture.
6. Provide 50 to 55 footcandle (fc) for general illumination.
Lighting shall have motion sensors; controls shall be located
within close proximity to the entry door. This space does
not require natural light. If applicable, provide windows with
blinds or shades to control natural light.
Facility Programming and Consulting
An Architectural Space Program for the City of San Antonio
Final - May 2013
Pre-K 4 SA Early Childhood Centers - East and Westside Centers
Page 4.41