Programming Documents for Pre-K for SA - The City of San Antonio

6.2.7 Multi-User Telecommunications Outlet Assembly (MuTOA)
A. Constructed of durable UV resistant, high impact plastic.
B. Compatible with single or dual gang electrical box.
C. Accommodates any combination of up to 18 ports of mixed media or up to 36 fibers.
6.2.7.1 Acceptable Manufacturer’s
1. Panduit
6.2.8 Wall-Phone Jack Assembly
A. Provide stainless steel duplex faceplate equipped with mounting lugs designed to mate with
corresponding telephone base plate and single 630B.
6.2.8.1 Acceptable Manufacturer’s
1. Panduit
6.3 Execution
6.3.1 Installation
A. Install all equipment and components in accordance with manufacturer's written instructions
with sound engineering practices as established by EIA/TIA and in compliance with NEC and
recognized industry practices, to ensure that all items comply with specifications and serve
intended purposes.
B. Contractor work force, sub-contractors and material suppliers shall review and comply with
all safety, security rules, codes and regulations, applicable to construction site personnel.
C. Horizontal Cabling
1. Contractor shall supply horizontal cables to connect each information outlet to the
backbone subsystem.
2. Each work location shall have one or more runs of Category 5e UTP cable, placed in
home run fashion from the location to the nearest intermediate telecommunications closet.
Splicing of station cables is not permitted. Station cable shall be Blue in color or unless
otherwise identified..
(A)Terminate station cable (Blue) on rack mounted 24 or 48 port modular patch panels.
3. A blank cover plate shall be provided on all outlet boxes where cable is not initially
installed.
27