sepam 20 user manual - Schneider Electric

Metering functions Contents
PCRED301005EN - 06/2008
General settings 2/2
Characteristics 2/3
Phase current
Residual current 2/4
Average current and peak demand currents 2/5
Phase-to-phase voltage
Phase-to-neutral voltage 2/6
Residual voltage
Positive sequence voltage 2/7
Frequency
Temperature 2/8
Tripping current
Negative sequence / unbalance 2/9
Disturbance recording 2/10
Running hours counter and operating time
Thermal capacity used 2/11
Operating time before tripping
Waiting time after tripping 2/12
Starting current and
starting / overload time 2/13
Number of starts before inhibition
Start inhibit time delay 2/14
Cumulative breaking current and number of operations 2/15
Operating time
Charging time 2/16
2/1
2