sepam 20 user manual - Schneider Electric

7
Use Advanced UMI
Blue keys for parameter and
protection setting
7/16
key
The "status" key is used to display and enter the Sepam
general settings including setting the Sepam date and
time. They define the protected equipment
characteristics and the different optional modules.
This key can also be used to access the version
compatible with SFT2841 screen.
key
The "protection" key is used to display, set and enable
or disable the protection units.
key
The "key" key is used to enter the passwords for access
to the different modes:
b protection setting
b parameter setting
and return to "operating" mode (with no passwords).
MT10810
MT10811
MT10808
on I>51 I >> 51 Io > 51N Io >> 51N ext
0 off
General settings
language frequency
English 50 Hz
French 60 Hz
A/B choice (A actif)
= A
clear
on I>51 I >> 51 Io > 51N Io >> 51N ext
0 off
50/51
Trip
Curve
Threshold
Delay
1A
=
=
=
Off
On
inverse
110 A
100 ms
clear
on I>51 I >> 51 Io > 51N
Io >> 51N ext
0 off
passwords
apply cancel
clear
I on
reset
I on
reset
I on
reset
Trip
Trip
Trip
PCRED301005EN - 06/2008