sepam 20 user manual - Schneider Electric

6
DE80030
DE80029
Installation Base unit
Dimensions
6/6
DE80114
Dimensions
6.92
Front view of Sepam. 1.58
Sepam with advanced UMI and MES114,
(1) flush-mounted in front panel.
1.58 3.86 1.22 (1) With basic UMI: 23 mm (0.91 in).
mm
in
mm
in
CAUTION
HAZARD OF CUTS
Trim the edges of the cut-out plates to remove
any jagged edges.
Failure to follow this instruction can cause
serious injury.
6.38
8.5
9.23
AMT840 mounting plate.
7.95
8.8
0.25 1.58
1.58
0.4
1.58
1.58
1.58
0.60
9.05
DE80028
Sepam with advanced UMI and MES114,
flush-mounted in front panel.
Clearance for Sepam assembly
and wiring.
Cut-out
Cut-out accuracy must be complied with to ensure good withstand.
For mounting plate between 1.5 mm
(0.059 in) and 3 mm (0.12 in) thick
DE80042
DE80044
For mounting plate
3.17 mm (0.125 inch) thick
Assembly with AMT840 mounting plate
Used to mount Sepam with basic UMI at the back of the compartment with access to
the connectors on the rear panel.
Mounting associated with the use of the remote advanced UMI (DSM303).
mm
in
DE80082
1.58
mm
in
7.71
mm
in
6.38
Mounting
clip
7.95
Sepam with basic UMI and MES114, mounted with AMT840 plate.
Mounting plate thickness: 2 mm (0.079 in).
8.8
4.84
mm
in
mm
in
6.3
6.93
2.91
0.47
6.38
2.04
7.95
0.08
3.85
(1)
1.22
PCRED301005EN - 06/2008