sepam 20 user manual - Schneider Electric

Use SFT2841 setting and operating
software
Configuration of a Sepam network
PCRED301005EN - 06/2008
PE80115
Connection window
The SFT2841 software connection window is used:
b To select an existing Sepam network or configure a new one
b To set up the connection to the selected Sepam network
b To select one Sepam unit from the network and access its parameters, settings,
and operation and maintenance information.
Configuration of a Sepam network
Several configurations can be defined for the various Sepam installations.
A Sepam network configuration is identified by a name. It is saved on the SFT2841
PC in a file in the SFT2841 installation directory (default: C:\Program
Files\Schneider\SFT2841\Net).
Configuration of a Sepam network is in 2 parts:
b Configuration of the communication network
b Configuration of the Sepam units.
Configuration of the communication network
To configure the communication network, first define:
b The type of link between the PC and the Sepam network
b The communication parameters, according to the type of link selected:
v direct serial link
v link via Ethernet TCP/IP
v link via telephone modem.
Configuration window for the communication network, according to the type of link: serial link,
modem link (STN) or Ethernet link (TCP).
7/7
7