sepam 20 user manual - Schneider Electric

Installation Base unit
Assembly
PCRED301005EN - 06/2008
DANGER
HAZARD OF ELECTRIC SHOCK, ELECTRIC
ARC OR BURNS
b Only qualified personnel should install this
equipment. Such work should be performed only
after reading this entire set of instructions.
b NEVER work alone.
b Turn off all power supplying this equipment
before working on or inside it. Consider all
sources of power, including the possibility of
backfeeding.
b Always use a properly rated voltage sensing
device to confirm that all power is off.
Failure to follow these instructions will result
in death or serious injury.
DE51143
The Sepam is simply flush-mounted and secured by its clips. No additional screw
type fastening is required.
1 Present the product as indicated, making sure the metal plate is correctly entered
in the groove at the bottom.
2
Tilt the product and press on the top part to clamp it with the clips.
6/7
6