Models 5E, 5F, 5G & 5H Electric Switch Machines: Single ... - Alstom

Corrective Maintenance6.2. TEST EQUIPMENT AND TOOLSFollowing is a listing of tools required for switch machine disassembly and assembly.Part numbers for tools and test equipment are listed here. Part numbers and drawingsfor tools and test equipment can be found in Section 7. Common toolbox tools such ascrew drivers, pliers, and allen wrenches are not specifically listed but may be required.Table 6–1. Tools and Test Equipment IndexEquipment Name Specific Use Manufacturer/ModelCrow Bar General use Commercially availableWrench, 1/2” Open End General use Alstom P/N 36593-022-00Wrench, Steel 3/8” and7/16” Double Open EndGeneral useCommercially availableWrench, 9/16” Open End General use Commercially availableWrench, 5/8” Open EndWrench, 7/8” and 3/4”Double Open EndSwitch Adjusting, DetectorRodsFor removing Motor andGear Bracket, Lock andDetector RodsCommercially availableAlstom P/N 43576-005-00Wrench, 1” Open End Switch Adjusting, Lock Rod Commercially availableWrench, 1 1/16” SingleEndWrench, 1 1/4” Single End Throw Rod and SwitchAdjustingSwitch Adjusting Alstom P/N 36593-008-00Alstom P/N 36593-007-00Wrench, 1 5/8” Single End Switch Adjusting Alstom P/N 36593-006-00Wrench, 2” Single End Switch Adjusting Alstom P/N 36593-005-00Wrench, Insulated socketFor No. 14 AAR terminalpost nutsAlstom P/N 15194-010-02Wrench, for No. 10 Nuts No. 10 Terminal Nuts Commercially availableCoupling Throw Bar Alstom P/N 51153-001-00Test Bar Alstom P/N 59515-001-00Oil Alstom 91A0007 Alstom P/N 51347-006-033M Scotch-Grip RubberAnd Gasket Adhesive 847Cover gasket adhesiveCommercially availableP1293, Rev. Jun/07 6–2 Alstom Signaling Inc.