Models 5E, 5F, 5G & 5H Electric Switch Machines: Single ... - Alstom

Corrective Maintenance6.5.24. Arm (Clips)Table 6–36. Arm Maintenance ProcedureStepAction1 NOTEFor arm disassembly and reassembly, see Table 6–7.Clean the two arms (clips), removing dirt, grease, and oil by using approvedcleaning solvent.6.5.25. Lock RodTable 6–37. Lock Rod Maintenance ProcedureStepAction1 NOTEFor lock rod disassembly and reassembly, see Table 6–7.Clean the lock rod of all grease, oil, dirt, etc., using an approved cleaningsolvent.2 Use grease to lubricate all sliding surfaces and threads on the lock rod. Donot use excessive grease.P1293, Rev. Jun/07 6–78 Alstom Signaling Inc.