Models 5E, 5F, 5G & 5H Electric Switch Machines: Single ... - Alstom

Corrective Maintenance6.5.7. Throw Bar BearingTable 6–19. Throw Bar Bearing Maintenance ProcedureStepAction1 NOTEFor throw bar bearing disassembly and reassembly, see Table6–7.Clean throw bar bearing (1) of any dirt, grease, or oil by using an approvedcleaning solvent. Replace if excessive wear is evident.2 Install throw bar bearing. Use grease to lubricate all surfaces affected bythrow bar sliding action.P1293, Rev. Jun/07 6–65 Alstom Signaling Inc.