Models 5E, 5F, 5G & 5H Electric Switch Machines: Single ... - Alstom

Corrective MaintenanceTable 6–7. Switch Machine Disassembly and Assembly Procedure (Cont.)StepAction64 Install the intermediate gear (17) into the switch machine in the reversesteps used to remove it. Insert the pinion shaft into the intermediate gearand align the dowel pin in the gear slot.65 Install the clutch pinion shaft (15) straight down into the clutch body (16).66 Install the gear bracket and tighten the four hex head screws and washers.67 Install the cutout switch block.Tighten the two screws that hold the block to the frame.68 Install the hand throw cutout switch block and secure with the two screws.69 Reassemble the hand throw cutout switch arm contacts, if they wereremoved and tighten the locknut on the bolt.P1293, Rev. Jun/07 6–33 Alstom Signaling Inc.