Models 5E, 5F, 5G & 5H Electric Switch Machines: Single ... - Alstom

Corrective MaintenanceTable 6–7. Switch Machine Disassembly and Assembly Procedure (Cont.)StepAction52 Slide the bearing assembly (35) along the detector rod and into the frame.Tighten the bearing with the two retaining bolts (36).Secure the filler block the filler block retaining bolt (37) from the wear plateassembly and machine frame.53 Install the heater complete (25) and wires (24), making sure that the wiresare correctly connected.Tighten the nuts (23) that hold the heater complete.54 CAUTIONIf wires were not labeled during disassembly, refer to wiringdiagram. Incorrect wiring could cause damage to theequipment.Connect all wires to the point detector.For Models 5E and 5G continue to Step 55; for Models 5F and 5H skip toStep 56.P1293, Rev. Jun/07 6–26 Alstom Signaling Inc.