DS7200V2-EXP - Simon Technologies

More documents

Recommendations

Info

DS7200V2-EXP | Installation Guide | 4. Reference Materials EN | 120Miscellaneous IssuesProblem Cause SolutionThere are numbers in braces{###} throughout this manual.My printer is printing strangecharacters and I cannot read it.These numbers {###} refer to theevent numbers described ControlPanel Events and Reporting Formatson page 107.The settings for the DX4010 RS-232Serial Interface Module can causeunexpected printer output.N/AVerify the settings for the following parameters (seethe DS7200V2 Expert Programming GuideP/N:4998153891):• “DX4010 Output Configuration” (Address 1253)• “Baud Rate Configuration” (Address 1254)• “Parity/Flow Control/Stop Bit Configuration”(Address 1255).Network communication is notworking as expected.• The DX4020 Network InterfaceModule is not properly wiredand/or configured.• The control panel is not properlyprogrammed for networkcommunication.• Make sure the DX4020 is properly connected tothe control panel. See DX4020 Wiring on page36.• Make sure the DX4020’s DIP switches are set toAddress 134 (see DX4020 Addressing on page35).• Make sure your selection for Address 3541includes the “Alternate Communication Interfaceat Address 134” option. See Network InterfaceModule Options on page 104.• See the DX4020 Installation Guide(P/N: 49522) for additional configurationrequirements.• Make sure you are using a valid IP address andthat you entered it correctly. See IP Address 1(2) for Destination 1 (2) on page 100.• Make sure selection for AlternateCommunication Options (see page 101)includes the “Enable Alternate Communication”option.4.3 Data Bus Address Quick ReferenceTable 41: Data Bus Address Quick ReferenceData Bus AddressDevice Description0 Installer Keypad or local connection to RPS1 to 8 Keypads 1 to 840, 41 DX8010 Telephone Control Module50 Premises RF Receiver 151 Premises RF Receiver 252 to 55 Premises RF Keypads Receiver 160 to 63 Premises RF Keypads Receiver 2101 to 107 DX2010 Wired Input Expanders134 DX4020 Network Interface Module (NIM)150, 151 DX3010 Output Expanders and/or DX3020 X-10 Interface Module250 DX4010i/DX4010 Serial RS-232 Interface ModuleBosch Security Systems, Inc. | 2/09 | 4998153893-03
DS7200V2-EXP | Installation Guide | 4. Reference Materials EN | 1214.4 Communication Attempt Tables• X = Communication (phone or network) attempt• CF = Communication FailureTable 42: Destination 1 OnlyPhone/IP Address 1 ProgrammedAttemptPhone/IP Address 1 and 2 ProgrammedDestination 1 Destination 2 Attempt Destination 1 Destination 2Ph/IP 1 Ph/IP 2 Ph/IP 1 Ph/IP 21 X 1 X2 X 2 X3 X 3 X4 X 4 X5 CF 5 CF6 67 78 89 910 10Ph/IP 1 Ph/IP 2 Ph/IP 1 Ph/IP 2Table 43: Destination 2 OnlyPhone/IP Address 1 ProgrammedAttemptPhone/IP Address 1 and 2 ProgrammedDestination 1 Destination 2 Attempt Destination 1 Destination 2Ph/IP 1 Ph/IP 2 Ph/IP 1 Ph/IP 2Ph/IP 1 Ph/IP 2 Ph/IP 1 Ph/IP 21 X 1 X2 X 2 X3 X 3 X4 X 4 X5 CF 5 CF6 67 78 89 910 10Bosch Security Systems, Inc. | 2/09 | 4998153893-03
Page 1 and 2:
DS7200V2-EXPENInstallation GuideDS7
Page 3 and 4:
DS7200V2-EXP | Installation Guide |
Page 5 and 6:
Page 7 and 8:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
P3LEDENABLEP2P6P1DS7200V2-EXP | Ins
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
. election, core spondingTosngsngan
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71: DS7200V2-EXP | Installation Guide |
Page 136: Bosch Security Systems, Inc.130 Per
show all

DS7200V2-EXP - Simon Technologies

Create successful ePaper yourself

Delete template?

Save as template?