DS7200V2-EXP - Simon Technologies

DS7200V2-EXP | Installation Guide | 3. Control Panel Programming EN | 77Duress Reporting Options• Address: 0702• Default: 0• Selections: 0 to 15Enter This Data Digit to Select OptionsDuress Reporting Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15No User Emergency Function Reporting •Make User 32 a Duress User • • • • • • • •Make User 31 a Duress User • • • • • • • •Make User 30 a Duress User • • • • • • • •Make User 29 a Duress User • • • • • • • •This parameter creates up to 4 Duress users (and PINs). Creating a Duress user does not change any otherfunction programmed for that user.Whenever a user enters a Duress PIN (PIN assigned to a Duress user), the control panel sends a Duress {74}report and executes functions per the Duress user’s authority level.DS7240V2 ProcedureTo create a unique Duress user (and PIN) for each area, select Option 15 and then assign each of the four users(User 29 through 32) to only one area.To create one Duress user (and PIN) for all areas, select Option 1, 2, 4 or 8 and then assign that user (User 29through 32) to all four areas.DS7220V2 ProcedureTo create a unique Duress user (and PIN) for each area, select Option 3, 5, 6, 9, 10, or 12, and then assign the twocorresponding users (User 29 through 32) to only one area.To create one Duress user (and PIN) for both areas, select Option 1, 2, 4, or 8, and then assign that user (User 29through 32) to both areas.Guard Code Options• Address: 0705• Default: 0 (No Guard Code Options)• Selections:- 0 = No Guard Code Options- 1 = User 28 is a Guard CodeUser 28 can be programmed as a Guard Code. The Guard Code only works in the areas to which User 28 isassigned. The authority level assigned to the Guard Code (User 28) dictates which keypad functions the guard canuse.Bosch Security Systems, Inc. | 2/09 | 4998153893-03