12.07.2015 Views

DS7200V2-EXP - Simon Technologies

DS7200V2-EXP - Simon Technologies

DS7200V2-EXP - Simon Technologies

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>DS7200V2</strong>-<strong>EXP</strong> | Installation Guide | 2. System Installation and Setup EN | 16Keyswitch Wiring – Single EOL ConfigurationFor maintained switches, connect the EOL resistor forthe zone at the keyswitch so that the switch opens thecircuit when it operates. A short on the circuit producesan alarm if the area is armed and a trouble if it isdisarmed. See Figure 11.Keyswitch Wiring – Zone Doubled ConfigurationFor maintained or momentary operation, wire thekeyswitch as shown in Figure 13.Figure 13: Keyswitch: Zone DoubledConfigurationFigure 11: Maintained Keyswitch: Single EOLResistor Configuration143121- Zone input2- Common3- 2.2 kΩ resistor4- Keyswitch (Open on circuit arms area)3For momentary switches, connect the EOL resistor forthe zone at the keyswitch so that the switch shorts theresistor when it operates. An open on the circuitproduces an alarm if the area is armed and a trouble ifit is disarmed. See Figure 12.Figure 12: Momentary Keyswitch: Single EOLResistor Configuration123 41- Zone input2- Common3- 2.2 kΩ resistor4- Keyswitch (Short on circuit toggles armingstate)421- Zone input2- Common3- Second zone wiring4- 2.2 kΩ or 3.65 kΩ resistor5- Keyswitch5Keyswitch Wiring – No EOL Resistor ConfigurationFor maintained or momentary operation, wire thekeyswitch as shown in Figure 14.Figure 14: Keyswitch: No EOL ResistorConfiguration121- Zone input2- Common3- Keyswitch3Bosch Security Systems, Inc. | 2/09 | 4998153893-03

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!