DS7200V2-EXP - Simon Technologies

More documents

Recommendations

Info

DS7200V2-EXP | Installation Guide | 4. Reference Materials EN | 1244.6 User Keypad CommandsTable 46: System Arming/Disarming FunctionsFunctionKeypad SequenceTurn the System All On [On] or [#][1]Turn the System Perimeter Only On [Perimeter Only] or [#][2]Turn the System Partial On [#][3]Bypass Zones[Bypass]Turn the System OffEnter a valid User PINSilence AlarmsEnter a valid User PINTable 47: Other System FunctionsFunctionKeypad SequenceView Faulted Zones [*]System Reset [System Reset] or [#][4][7]Check System Troubles [#][4]View Alarm Memory [#][4][0]System Test [#][4][1]View System Trouble [#][4][2]Remote Program [#][4][3]Walk Test [#][4][4]Change Date and Time [#][4][5]View Zone Trouble [#][4][8]Keypad Adjust [#][4][9]Move to Area [#][5][0]Extend Auto-On Time [#][5][1]Change Skeds [#][5][2]Renew One-time PINs [#][5][3]Change Outputs [#][5][4]Change PIN [#][5][5]Change Another User’s PIN [#][5][6][1]Change Another User’s PIN Authority Level [#][5][6][2]Add a PIN [#][5][6][3]Delete a PIN [#][5][8]Turn Chime On/Off [#][6][1]Select Chime Tone [#][6][2]Select Chime Zones [#][6][3]Set Partial On Zones [#][6][5]All Areas On [#][8][0]All Areas Off [#][8][1]Auto-Forward On/Off [#][8][2]Auto-Forward On Setup [#][8][3]Auto-Forward Off Setup [#][8][4]View Log [#][8][5]Enable Installer PIN [#][9][2]Bosch Security Systems, Inc. | 2/09 | 4998153893-03
DS7200V2-EXP | Installation Guide | 4. Reference Materials EN | 1254.7 History LogThe history log can store up to 254 events. When the log reaches its threshold, the control panel sends a LogThreshold {85} report. When the Log reaches capacity, the system sends a Log Overflow {84} report to the ARC.See “Log Supervision Configuration” in the DS7200V2 Expert Programming Guide (P/N: 4998153891).RPS can accept a download from the control panel’s log, thus clearing the log file. If the log is not cleared itbegins writing over previous events.The first line of the log shows the event description (see Control Panel Events and Reporting Formats on page 107).The second line of the log display alternates between the time and date of the event and the area, zone (device),user and communication information for the event. The control panel displays time in 24-hour format and thedate as programmed in the Date Format and Enable PIN Trouble parameter. See “Date Format and Enable PINTrouble” in the DS7200V2 Expert Programming Guide (P/N: 4998153891).To view the log, press [#][8][5]. The keypad might prompt you to enter a valid PIN. Press [*] to advance to thenext event. Press [#] to exit the log and return to the normal display. The history log uses the following charactersto communicate certain information:Table 48: History Log Display DescriptionsDisplayDescriptionA Area NumberZn Zone NumberDv Device NumberLn Phone Line NumberMn Minutes till Auto Arm SkedCd User Code NumberOp Output NumberKs Keyswitch NumberU User Number## Communication status for Routing Destinations 1 & 2The following table defines the communication status values that may appear in the history log:Table 49: History Log Communication Status ValuesValue Description Probable CauseA Aborted An alarm event was programmed with an event abortwindow and the control panel was silenced before theabort timer had expired. The keypad sounds a quick threebeeptone if an event report is aborted when the controlpanel is silenced.D Deleted from pending buffer by control panel reboot The control panel was rebooted before the events could besent.F Failed The event could not be sent to the specified destination.The problem might be at the receiver end, or with thecontrol panel programming.L Local The event is not programmed to report to any remotedestination.P Pending The event is waiting to be sent to the ARC.S Sent The event was successfully sent.Bosch Security Systems, Inc. | 2/09 | 4998153893-03
Page 1 and 2:
DS7200V2-EXPENInstallation GuideDS7
Page 3 and 4:
DS7200V2-EXP | Installation Guide |
Page 5 and 6:
Page 7 and 8:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
P3LEDENABLEP2P6P1DS7200V2-EXP | Ins
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
. election, core spondingTosngsngan
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75: DS7200V2-EXP | Installation Guide |
Page 136: Bosch Security Systems, Inc.130 Per
show all

DS7200V2-EXP - Simon Technologies

Create successful ePaper yourself

Delete template?

Save as template?