DS7200V2-EXP - Simon Technologies

DS7200V2-EXP | Installation Guide | 3. Control Panel Programming EN | 62Arming Options 2• Address: 0259• Default: 12• Selections: 0 to 15Enter This Data Digit to Select OptionsArming Options 2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15No Options Enabled •First Area to Open/Last Area to Close Reporting • • • • • • • •Make Area 1 Common Area • • • • • • • •Enable All Areas All On ([#][8][0]) • • • • • • • •Enable All Areas All Off ([#][8][1]) • • • • • • • •• First Area to Open {164}/Last Area to Close {165} Reporting: If this option is enabled, the system sendsone Closing {165} report when all areas are turned On and one Opening {164} report when any area is turnedOff. Opening/Closing reports must be enabled for all areas.Enabling the “Restrict Open/Close Reports” option overrides the “First Area to Open/Last Area toClose Reporting” option. See Area # Opening {89-96}/Closing {42-67} Reporting Options on page 65for more information on the “Restrict Open/Close Reports” option.All area account numbers must be the same in order to send Area 1’s account numbers. See AreaWide Parameters on page 64 for account number programming instructions.• Make Area 1 Common Area: If this option is enabled, all other areas are made common to Area 1. Area 1arms when all the other areas are armed All On, and Area 1 disarms when any other area is disarmed.• Enable All Areas All On ([#][8][0]): If this option is enabled, all areas arm when a user enters [#][8][0].Faulted zones are force-armed. Enable all areas in which the user has the appropriate authority level.• Enable All Areas Off ([#][8][1]): If this option is enabled, all areas disarm when a user enters [#][8][1]. Thisfunction always requires a PIN. Enable all areas in which the user has the appropriate authority level.Bosch Security Systems, Inc. | 2/09 | 4998153893-03