DS7200V2-EXP - Simon Technologies

DS7200V2-EXP | Installation Guide | 3. Control Panel Programming EN | 96Assign (Area or Output), Sked #• Address: See Table 38 on page 95• Default: 0 (No Area/Output Assigned)• Selections:- 0 = No Area/Output Assigned (Sked disabled)- 1 = Area 1 or Output 1- 2 = Area 2 or Output 2- 3 = Area 3 (DS7240V2 only) or Output 3- 4 = Area 4 (DS7240V2 only) or Output 4- 5 = Output 5- 6 = Output 6- 7 = Output 7- 8 = Output 8- 9 = Output 9- 10 = Output 10- 11 = Output 11- 12 = Output 12- 13 = Output 13 (DS7240V2 only)- 14 = Output 14 (DS7240V2 only)- 15 = Output 15 (DS7240V2 only)Enter a zero (0) in this parameter to disable the Sked.If the Sked Type is Auto On or Auto Off, this parameter assigns an Area to the Sked.If the Sked Type is Output On or Output Off, this parameter assigns a programmable output. How theprogrammable output functions at Sked time is determined in Output Parameters on page 85.The output assigned to the Sked in this parameter can be any output. The Sked overrides that function at SkedTime.The Output On/Off Sked function is only available for Outputs 1 to 15 on the DS7240V2. On theDS7220V2, it is only available for Outputs 1 to 12.Time, Sked #• Address: See Table 38 on page 95• Default: 0000 (Sked disabled)• Selections: 0 to 9Enter the start time for the Sked. There are four digits in this entry, each one occupying an address.Enter the time in 24-hour format (HHMM) where Midnight is 2400, noon is 1200 and 12:01 am is 0001.Enter 0000 to disable the Sked.Bosch Security Systems, Inc. | 2/09 | 4998153893-03