DS7200V2-EXP - Simon Technologies

More documents

Recommendations

Info

DS7200V2-EXP | Installation Guide | 3. Control Panel Programming EN | 76Alarm Output Option for ABC Keys• Address: 0700• Default: 0• Selections: 0 to 7Enter This Data Digit to Select OptionsAlarm Output Options for ABC Keys 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15No Alarm Output for ABC Keys •Alarm Output for [A] Key • • • •Alarm Output for [B] Key • • • •Alarm Output for [C] Key • • • •ReservedThis parameter assigns an alarm output option to the ABC keys. The alarm output activates for the response typeassigned to each key. This is a global parameter that affects all areas.ABC Key Reports/Ack Beep Options• Address: 0701• Default: 0• Selections: 0 to 15Enter This Data Digit to Select OptionsABC Keys Report & Ack Beep Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15No Alarm Report for ABC Keys •Enable ABC Keys Reporting • • • • • • • •Acknowledgement Beep for [A] Key • • • • • • • •Acknowledgement Beep for [B] Key • • • • • • • •Acknowledgement Beep for [C] Key • • • • • • • •This is a global parameter that affects all areas.• Enable ABC Keys Reporting: If this option is enabled, the keys report as follows:- [A] Key reports as Zone 100- [B] Key reports as Zone 101- [C] Key reports as Zone 102• Acknowledgement Beep for ABC Keys: If this option is enabled, the keypad beeps when the ARC receiveracknowledges a report. If the key is not programmed for reports, the beep occurs on activation.Bosch Security Systems, Inc. | 2/09 | 4998153893-03
DS7200V2-EXP | Installation Guide | 3. Control Panel Programming EN | 77Duress Reporting Options• Address: 0702• Default: 0• Selections: 0 to 15Enter This Data Digit to Select OptionsDuress Reporting Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15No User Emergency Function Reporting •Make User 32 a Duress User • • • • • • • •Make User 31 a Duress User • • • • • • • •Make User 30 a Duress User • • • • • • • •Make User 29 a Duress User • • • • • • • •This parameter creates up to 4 Duress users (and PINs). Creating a Duress user does not change any otherfunction programmed for that user.Whenever a user enters a Duress PIN (PIN assigned to a Duress user), the control panel sends a Duress {74}report and executes functions per the Duress user’s authority level.DS7240V2 ProcedureTo create a unique Duress user (and PIN) for each area, select Option 15 and then assign each of the four users(User 29 through 32) to only one area.To create one Duress user (and PIN) for all areas, select Option 1, 2, 4 or 8 and then assign that user (User 29through 32) to all four areas.DS7220V2 ProcedureTo create a unique Duress user (and PIN) for each area, select Option 3, 5, 6, 9, 10, or 12, and then assign the twocorresponding users (User 29 through 32) to only one area.To create one Duress user (and PIN) for both areas, select Option 1, 2, 4, or 8, and then assign that user (User 29through 32) to both areas.Guard Code Options• Address: 0705• Default: 0 (No Guard Code Options)• Selections:- 0 = No Guard Code Options- 1 = User 28 is a Guard CodeUser 28 can be programmed as a Guard Code. The Guard Code only works in the areas to which User 28 isassigned. The authority level assigned to the Guard Code (User 28) dictates which keypad functions the guard canuse.Bosch Security Systems, Inc. | 2/09 | 4998153893-03
Page 1 and 2:
DS7200V2-EXPENInstallation GuideDS7
Page 3 and 4:
DS7200V2-EXP | Installation Guide |
Page 5 and 6:
Page 7 and 8:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27: DS7200V2-EXP | Installation Guide |
Page 32 and 33: P3LEDENABLEP2P6P1DS7200V2-EXP | Ins
Page 48 and 49: . election, core spondingTosngsngan
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136:
Bosch Security Systems, Inc.130 Per
show all

DS7200V2-EXP - Simon Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?