DS7200V2-EXP - Simon Technologies

More documents

Recommendations

Info

DS7200V2-EXP | Installation Guide | 3. Control Panel Programming EN | 86Area, Output ##• Address: See Table 33 on page 85• Default: 1 (Assign Output to Area 1)• Selections: 0 to 15Enter This Data Digit to Select OptionsOutput Area Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15No Area Assigned (Output disabled) •Assign Output to Area 1 • • • • • • • •Assign Output to Area 2 • • • • • • • •Assign Output to Area 3 (DS7240V2 only) • • • • • • • •Assign Output to Area 4 (DS7240V2 only) • • • • • • • •This parameter assigns an area to the output. Functions are only activated by keypads or zones assigned to thesame area. Outputs can be assigned to multiple areas.Bosch Security Systems, Inc. | 2/09 | 4998153893-03
DS7200V2-EXP | Installation Guide | 3. Control Panel Programming EN | 87Function, Output ##• Address: See Table 33• Default:- PO 1: 1|10 Alarm: Controlled and 24-hr Zones (Fire and Non-Fire)- PO 2: 1|6 Strobe- PO 3: 0|1 Armed: All, Perimeter Only, or Partial On- PO 4: 2|13 Ready to Arm- PO 5 to PO 20: 0|0 Disabled• Selections: 0,0 to 8,15 (see Table 34)This parameter assigns each output to a specific function. The function determines when the output activates. TheMode, Time and Multiplier parameters, in combination with this Function parameter, determine when the outputdeactivates.All output functions can be reset using [#][5][4] except Alarm Outputs that follow Function Types 1|8 to 1|12,2|11, 8|8, and those functions that can be reset by pressing [System Reset].Table 34: Output Function TypesDigit 1 Digit 2 Function Type Description0 0 Disabled0 1 Armed – All, Perimeter Only, orPartial On0 2 Armed – Perimeter Only orPartial OnOutput activates when the system is armed All On, Perimeter Only, orPartial On. For Steady or Pulse modes, the output remains activated untilthe system is turned off.Output activates when the system is armed Perimeter Only, or Partial On.For Steady or Pulse modes, the output remains activated until the systemis turned off, or moved to another armed state.0 3 Armed – All Output activates when the system is turned All On. For Steady or Pulsemodes, the output remains activated until the system is turned off, ormoved to another armed state.0 4 Auto Arm Alert Output activates at the start of the Auto Arm Alert. For Steady or Pulsemodes, the output remains activated for the duration of the alert. See“Auto On Alert Time” in the DS7200V2 Expert Programming Guide(P/N: 4998153891).0 5 Exit Delay or Entry Delay Output activates at the start of Exit Delay or Entry Delay. For Steady orPulse modes, the output remains activated until entry or exit delay ends.0 6 Exit Delay Output activates at the start of Exit Delay. For Steady or Pulse modes, theoutput remains activated until exit delay ends.0 7 Exit Delay Finished (untildisarmed)Output activates at the end of Exit Delay. For Steady or Pulse modes, theoutput remains activated until the system is disarmed.0 8 Armed with Ack For systems programmed for closing reports, the output activates whenthe acknowledgement for the closing report is received. For systems notsending closing reports, the output activates at the end of Exit Delay. ForSteady or Pulse modes, the output remains activated until the system isdisarmed.0 9 Entry Delay Output activates at the start of Entry Delay. For Steady or Pulse modesthe output remains activated until Entry Delay ends.0 10 Entry Delay + Chime Output activates at the start of Entry Delay. For Steady or Pulse modes,the output remains activated until entry delay ends. The output alsoactivates whenever a Chime zone is faulted. The output does notactivate on Chime if Chime Tone is turned off.Bosch Security Systems, Inc. | 2/09 | 4998153893-03
Page 1 and 2:
DS7200V2-EXPENInstallation GuideDS7
Page 3 and 4:
DS7200V2-EXP | Installation Guide |
Page 5 and 6:
Page 7 and 8:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
P3LEDENABLEP2P6P1DS7200V2-EXP | Ins
Page 34 and 35:
Page 36 and 37: DS7200V2-EXP | Installation Guide |
Page 48 and 49: . election, core spondingTosngsngan
Page 136:
Bosch Security Systems, Inc.130 Per
show all

DS7200V2-EXP - Simon Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?