Altivar 61 - error

DSP402 standard configuration and adjustment parameters
Code
Description
SPFd Parameter name: Speed setpoint factor denominator
DSP402 name:
DRIVECOM name:
vl setpoint factor denominator
Setpoint-Factor-Denominator
Logic address: 8643 = 16#21C3 Type: INT
CANopen index: 604B/2 Read/write: R/W
INTERBUS index: 604B/2 Unit: -
DeviceNet path: - Factory setting: 1
Adjustment range -32768 ... -1; 1 ... 32767
Parameter conforming to DSP402 profile.
The speed setpoint factor is obtained by the )Divisor) and )Multiplier) parameters.
These parameters have no unit and can take a value from -32768 to 32767, excluding value 0.
The factor is used to modify the resolution or the direction of the setpoint. It is applied to the setpoint, and the references and
output values of the speed function only.
Reference:
input
numerator
DIV
MUL
output
denominator
References and output values:
input
numerator
MUL
DIV
output
denominator
136