Altivar 61 - error

[1.8 FAULT MANAGEMENT] (FLt-)
[OUTPUT PHASE LOSS] (OPL-)
Code
Description
OPL Terminal display: [Output Phase Loss]
Logic address: 9611 = 16#258B Type: WORD (listing)
CANopen index: 2042/C Read/write: R/WS
INTERBUS index: 5FBC/EB Factory setting: 1
DeviceNet path:
91/01/0C
0=[No] (nO): Function inactive
1=[Yes] (YES): Tripping on OPF fault with freewheel stop
2=[Output cut] (OAC): No fault triggered, but management of the output voltage in order to avoid an overcurrent
when the link with the motor is re-established and catch on the fly performed (even if this function has not been
configured).
Odt Terminal display: [OutPh time detect]
Logic address: 7081 = 16#1BA9 Type: UINT
CANopen index: 2028/52 Read/write: R/W
INTERBUS index: 5FBF/07 Unit: 0.11 s
DeviceNet path: 84/01/52 Factory setting: 5
Adjustment range:
5to100
Time delay for taking [Output Phase Loss] (OPL) fault into account.
[INPUT PHASE LOSS] (IPL-)
Code
Description
IPL Terminal display: [Input phase loss]
Logic address: 7002 = 16#1B5A Type: WORD (listing)
CANopen index: 2028/3 Read/write: R/WS
INTERBUS index: 5FBC/86 Factory setting: According to drive rating (1)
DeviceNet path: 84/01/03
0=[Ignore] (nO): Fault ignored, to be used when the drive is supplied via a single phase supply or by the DC bus.
1=[Freewheel] (YES): Fault, with freewheel stop
(1) 0=[Ignore] (nO) for ATV61H037M3 to HU75M3, 1 = [Freewheel] (YES) for others.
232